Axcera CHV400BTD, Technical Manual, Page: 37 / 87

Innovator CHV400BTD ATSC Transmitter Initial On Site
Turn On Procedure
Technical Manual, Rev. 0 33
Table 11.1.10: Chassis Values Reset Ethernet User Name Set Up Screen
(BTD/BRD)
When the optional Ethernet Controller is present, this screen is displayed. It is
used to reset the username / password file of the Ethernet controller. If this
operation is selected, ON, the username / password file is replaced with the
user name set to ‘admin’ and the password set to ‘axcera’.
Table 11.1.11: Chassis Values Ethernet Address Set Up Screen (BTD/BRD)
When the optional Ethernet Controller module is present, this screen is used to
view or change the Ethernet TCP Address of the controller.
Table 11.1.12: Chassis Values Ethernet Netmask Set Up Screen (BTD/BRD)
When the optional Ethernet Controller module is present, this screen is used to
view or change the TCP subnet mask of the Ethernet controller.
Table 11.1.13: Chassis Values Ethernet Gateway Set Up Screen (BTD/BRD)
When the optional Ethernet Controller module is present, this screen is used to
view or change the TCP gateway (router) address of the Ethernet controller.
Table 11.2: 8VSB Demodulator Main Set Up Menu Screen (BRD)
This is the System Set Up 8VSB Demodulator Main Sub Screen that is only present in
the Regenerative Translator mode. Push the ENTER button to access the Set Up 8VSB
Demodulator submenus or push the DOWN Arrow to view the next Set Up Main Sub
Screen, which is the Set Up 8VSB Modulator Main Sub Screen.
NOTE: Refer to the
description in Table 11B for how to change the values on the following set-up screens.
Table 11.2.1: 8VSB Demodulator Channels Set Up Menu Screen (BRD)
This screen allows selection of the channel plan which can be changed to either
Off Air or Cable.
Table 11.2.2: 8VSB Demodulator Channel Select Set Up Menu Screen (BRD)
This screen allows selection of the channel, for the channel plan selected in the
previous screen.