IV. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display]
Elimination of errors
Nothing, Battery-Symbol, [lo] or [88888]
Change the batteries.
[o-ld]
The scale has been overloaded. You can
try recalibrating the scale as shown above.
You are overloading the scale. Remove the
excessive load immediately!
[out2]
Scale is out of calibration. Try
recalibrating. (see Section III)
