AWOL VISION LTV-2500, User Manual

Page: 5 / 127

Power Supply
Incorrect voltages can damage the device. Only connect this unit to a power supply with the correct voltage and frequency noted on the type plate, using the supplied power cable.
- Do not overload the power outlets by connecting too many appliances to the same outlet. Overloaded wall outlets, extension cords, etc. are dangerous and can result in electric
shock and fi re.
- By means of a power cord connected to a socket-outlet with earthing connection.
- Do not touch the power plug with wet hands.
- Do not place heavy objects on the power cable. Route the cable so that it is not kinked or laid over sharp edges, walked on or exposed to chemicals. A power cable with damaged
insulation can cause electric shock and fi re.
- Pull the power plug, NOT on the cable when disconnecting. The cable can become damaged and cause a short circuit if pulled on.
- Do not place the power cable near a high temperature object.
- Do not use a damaged or loose power cable, or a damaged socket outlet.
- As long as the power plug is connected to a live socket outlet, the device will consume power even in standby mode. The power plug should be disconnected during long
periods of absence.
Air Ventilation and High Temperatures
Install your device only where there is proper ventilation, and ensure that there is at least 7.8 inch(20 cm )of free space on the sides and 5.9 inch(15 cm) of free space on the back
of the unit for air circulation. Excessive heat and obstruction of ventilation could lead to
fi re or early failure of some electric components.
- Do not block any ventilation openings with newspapers, tablecloths, curtains, etc.
- Do not touch the ventilation openings, they may become hot
- Do not insert foreign objects into the device through the vents..
Cleaning and Care
Clean the device, the screen, and the remote control with a soft, moist, clean and natural cloth only, do not use any chemicals.