WARNING
TO RUDUCE THE RICK OF FIRE, ELECTRIC SHOCK OR INJURY,
PLEASE OBSERVE THE FOLLOWINGS:
１．
Installation work and electric wiring (including switch location) must be
done by the qualified person(s) in accordance with local applicable
codes and standards, including fire-rated construction.
２．
This hood may have sharp edges. Be careful to avoid cuts and abrasions
during installation and cleaning.
３．
The hood must be placed at a minimum distance of 65cm from the cook
panel and 75cm from gas cooker.
４．
Provide sufficient air for proper combustion and exhausting of gases
through the chimney of the burning equipment to prevent backdrafting.
Follow the heating equipment manufacturer’s guideline and safety
standards such as those published by the National Fire Protection
Association, and the American Society for Heating, Refrigeration and Air
Conditioning Engineer (ASHRAE), and the local code authorities.
５．
Ducted fans must always be vented to the outdoors.
６．
This appliance is designed to be operated by adults. Children are not
allowed to temper with the controls or play with this appliance.
７．
To reduce the risk of fire or electric shock, do not use this fan with any
solid-state speed control device.
８．
When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
９．
If this unit is to be installed over a tub or shower, it must be marked as
appropriate for the application and be connected to a GFCI (Ground
Fault Circuit Interrupter) - protected branch circuit.
１０．
Before serving or cleaning the unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
１１．
Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the manufacturer.
