MAINTENTANCE & CLEAN
1.
Disengage the small grease guard cups from the grease guard by
turning counterclockwise and remove.
2.
Remove the screw retaining the grease guard to the hood.
3.
Remove the grease guard from the hood. Then remove the bottom
plate.
4.
Unscrew the clips and remove the wheel grease collector.
5.
Remove the wheel center cap.
6.
Loosen the wheel set screw in order to disengage the wheel from its
motor shaft
.
Soak all removed parts in warm water with soft soap for 30 minutes. Then
wash with nylon brush, rinse and dry completely before reinstalling.
NOTE:
When reinstalling the wheel, align the end of the set screw with the
flat part of the motor shaft (A)
