7
Install the 2 pieces magnetic switch to the door/window edge and frame; keep them close when the
door/window is closed.
Hard wiring to 12V low voltage magnetic switch is NOT needed.
Air Curtain
Dedicated 2 wires (12V DC) for
the magnetic switch
M
M
Install the 2 pieces magnetic
switch close together
Door/window
Door/window
frame
Power cord (110V AC)
The air curtain should be installed indoor, consult with your electrical professional for
electrical hard wiring connection.
8. OPERATING INSTRUCTIONS
8.1 Connect power (110V 60Hz) to the unit.
8.2 Press the switch to the left or right to turn on the unit. [L] - Low speed, [H] - High speed.
8.3 Adjust the air deflector to slightly outward at about 10 to 15 degrees to obtain optimum effect.
9. MAINTENANCE AND CLEANING
WARNING:
A. Any service is to be performed only by qualified personnel who are familiar with local
codes and regulations and are experienced with this type of product.
B. Always unplug or disconnect the appliance from the power supply before servicing or
cleaning the unit.
C. Never use petrol, benzene, thinners or any other such chemicals for cleaning the unit.
D. Don’t allow water or any liquid to enter the motor.
9.1. Use the unit at the rated voltage and frequency indicated on the rating label.
9.2. Disconnect power source before unit installation or maintenance service.
9.3. Routine maintenance must be done every year.
9.4. Plastic parts should be cleaned with mild soap water, thoroughly remove soap film with a
clean damp cloth.
9.5. Wipe the exterior surfaces of the fan with a moistened cloth with a solution of mild detergent
and water.
9.6. Dry the case with a soft dry cloth before operating the unit.
10. SUPPORT AND CONTACT
Contact your local seller for exchange or repair.
Visit www.awoco.com for most updated information.
Email to [email protected] for technical support and sales activity.
