Page | 12
Step 7: Installing the Shutters to the (d1/d2) Left/Right Frame, (e) Middle
Support, and (e2) Center Middle Support
7a)
Installing the Shutter Sets to the (d1) and (d2) Left and Right Frame and (e) Middle Support
i.
Be sure the Shutter Slats are evenly lined up with each other and also between the grooves
of the (d1) and (d2) Left and Right Frame and (e) Middle Support.
ii.
Locate the 6 pre-drilled holes on the (h) Louver l-Frame on each shutter set. Install sheet
screws into each pre-drilled hole to install the Shutter sets to the awning. (There are no
pre-drilled holes on the inside of the frame. More force will need to be used when drilling
into the frames metal)
Figure A7.1:
Installing a Shutter Set to the inside of the frame
Summary of Contents for BAHAMA
Page 3: ...Page 3 Parts List Parts Included ...
Page 4: ...Page 4 ...
