manualshive.com logo in svg

AWH DN10, Operating Instructions Manual, Page: 13 / 28

Share
Download
AWH DN10 Operating Instructions Manual Download Page 13

11/13

Inline Sight Glass

Operating Instructions

4. Safety / Hazards

4.1 Notes / Explanations

HAZARD

“HAZARD”

 warns of hazardous situations. Avoid these hazardous situations. 

Failure to do so could result in death or serious injury. 

WARNING

“WARNING”

 warns of hazardous situations. 

Avoid these hazardous situations. 

Failure to do so could result in death or serious injury.

CAUTION

“CAUTION”

 combined with a warning symbol indicates hazardous situations. 

Avoid these hazardous situations. 

Failure to do so could result in minor injury.

Note

“NOTE”

 indicates recommended actions. Failure to comply with these will not 

result in personal injury. However, follow the recommended actions to avoid 

damage to property and trouble.

Note

The installation instructions

 are binding;

indicated by a book symbol.

HAZARD

This symbol indicates 

crushing hazards.

HAZARD

This symbol indicates a risk of 

burning.

Note

Environment symbol

Indicates environmental protection measures.

16

Summary of Contents for DN10





























Reviews:

No comments