USER’S MANUAL
4
Ⅴ
. INSTALLATION & OPERATION
A.
Before installation, please select the
better
position
at high humidity level
, the air outlet and inlet
should be spaced to ensure well ventilated.
Notice: This machine should be installed outdoor, need build an open room on the machine upper,
above the upper more 2.5 M to prevent the rain and other items from the upper into the machine
and damaging machine.
B.
Please connect the machine's power cord with the external special distribution box.
Notice: A: External power supplies must meet the machine normal working requirements.
B: This machine uses for three-phase four-wire system power supply mode, with sequence
and phase lack protection function inside circuit, when external three-phase power and
machine
device don’t correspond sequence or phase lack, the control panel key doesn't
work, humidity display window shows "E3 or E4", this time need to adjust the power
sequence or check the power.
C: must be operated by professionals to install and debug.
C
.
Separately press the four "Power
“button on the
Operation panel, the machine starts to work.
D
. Operation panel button instruction.
a
：
"Power" button: press this button to power on or power off.
b
：
"Humidity or hour increasing" button: set the increasing humidity, each time you press the button,
the buzzer rings once, setted humidity increases 1%RH. Press "setting time/clock" for time
(hour) operation.
c
：
"Humidity reducing" button: set the reducing humidity, each time you press the button, the
buzzer rings once, setted humidity reduce 1%RH. Press "setting time/clock" for time(minute) operation.
