51
WARNING
Step 13: SECURE LOAD.
(1) Once movement of the load is complete, be sure to secure the load completely.
Step 14: DISCONNECT FROM ANCHOR.
(1) Once load is secure, release tension in the winch rope by reversing the rotation control
switch (counterclockwise position) on your drill/driver and begin pressing the speed
trigger on your drill/driver.
(2) Slowly power out a short length of winch rope.
(3) Disconnect anchor hook from the anchor.
Step 15: POWER-IN WINCH ROPE.
(1) With clutch still in the lock (engaged) position.
(2) Press the rotation control switch on your drill/driver to forward/clockwise position.
(3) Arrange the winch rope so it will not kink or tangle when powering-in by keeping tension
on the winch rope.
NOTE: Be sure any winch rope already on the spooling drum is wound tightly.
(4) Slowly power-in the winch rope by pushing the speed trigger switch on the drill/driver
and walk slowly towards the load until the rope hook approximately 30 cm from the fair-
lead.
Never spool in rope hook against the fairlead; the rope hook should
be loose at the fairlead.
(5) Once the rope hook is within 30 cm from the fairlead, stop winching in and remove the
rope hook from the load.
(6) Slowly pulse trigger to winch in the rest of the winch rope, leaving at least 15 cm from
fairlead to rope hook.
(7) Winching operations are now complete.
(8) Remove drill/driver from winch by releasing/unlocking drill chuck from driver shaft.
(9) Store the winch in a clean and dry place.
