23
•
Store idle tool out of the reach of children and do not allow persons unfamiliar with the tool or
these instructions to operate it. The tool is very dangerous in the hands of an untrained user.
•
Maintain the tool with care. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the machine operation and safety. If you notice
any damages in the tool, have it repaired in an authorized service center before use. Many acci-
dents are caused by poorly maintained tools.
•
Keep blades sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
•
Use the tool and accessories in accordance with these instructions taking into account the work-
ing conditions and the work to be performed. Use of the tool for operations different from those
intended is dangerous and strictly forbidden.
•
Hold the tool by insulated gripping surfaces when there is danger that the tool may contact hid-
den or visible wires. Contact with a live wire will make the metal parts of the tool ”live” and
shock the operator.
•
Do not start the saw with the blade touching any surface.
•
Never leave the machine running unattended. Turn power off and do not leave the machine
until it comes to a complete stop.
Maintenance
•
Repairs should only be carried out by an authorized service center using only original spare
parts, otherwise this may result in considerable danger to the user.
•
Use only original spare parts and accessories. The use of any other spare parts or accessories
than original parts may cause a risk of personal injury.
PARTS
Numbering refers to the figures in the beginning of this manual.
GENERAL:
1.
Saw table
2.
Dust nozzle
3.
Lateral machine parts
4.
Feet
5.
Rotating handles for locking feet
6.
Transport bar
7.
Pivot unlock lever
8.
Saw blade
9.
Pin wrench (see FIG. 3)
10.
13 mm hex wrench (see FIG. 3)
TABLE SAW:
11.
ON/OFF safety switch
12.
Handle for adjusting cutting height (removable, see also part 36)
13.
Splitter blade
14.
Saw blade protection
15.
Parallel guide
16.
Handle for adjustment and locking the incline angle
18.
Pusher attachment
MITRE SAW
19.
Saw head
20.
Saw head locking lever
