AWC APP-III, Manual, Page: 5 / 12

1
Overview
The APP-III allows you to develop PIC code for the powerful
PIC18F252 microcontroller. The kit includes a special PIC18F252
(28 pin microprocessor) that operates at 20MHz and a 20MHz
crystal. The kit includes a PC board (the GPMPU28) which allows
you to provide power to the board, connect an RS-232 cable to the
board, and optionally plug the board into a standard solderless
breadboard. See the enclosed manual for the GPMPU28 for more
information about this board (including assembly instructions).
If You Need Help
If you require assistance, please feel free to contact us. The best
way to get support is via e-mail (
stamp@al-williams.com) .
However, you may also call between 9AM - 4PM Central Time at
(281) 334-4341. You can also fax to (281) 754-4462. Be sure to
check out our Web page for updates at
www.al-
williams.com/awce.
What Else You'll Need
In addition to the APP-III kit, you'll also need a few other easy to
obtain items:
•
A solderless breadboard
•
An unregulated power supply (DC between 8 and 13V) or a
5V regulated power supply.
•
MPLAB, the free software from Microchip (or another
development tool that produces 8-bit hex files)
•
A serial cable (a DB9 male to female, if you are using a
PC).