7
6
a perfect partner in performance...
a perfect partner in performance...
Pressure Independent Variable Air Volume ( Single Duct)
Casing
Casings are made of high quality Galvanized Sheet Steel of 1.0mm Thick.
Internal Insulation
VAV Boxes are Internally Insulated with ½ Inch Or 1 Inch Acoustic
Liner (in compliance with project requirement).
Metal encapsulated edge prevents cut fibers of the insulating plate falling off, and avoids
erosion in the air stream.
VAV Damper Shafts
VAV Damper Shafts are made of 12mm Dia Round Solid
Composite Steel shafts, which prevents condensation and breakage.
Damper Gaskets
Blade edges are sealed with Rubber Gaskets, preventing air leakage
and for an air tight operation with low leakage characteristics.
VAV Sound Attenuator (optional only)
VAVs are provided with Sound Attenuator
as an optional (upon request), where excess noise to be decreased or controlled
maximum.
Flow Grid
Differential Flow Grids are located inside the VAV inlet with pre-calibrated
holes with die cast aluminum junction, which measures air volume accurately.
Electric Duct Heater
(Optional only) Terminal shall include an integral electric
heater, where indicated on the plans. The heater Control Box shall be constructed of not
less than 20 gauge galvanized steel. Heater shall have a hinged access panel for entry to
the controls.
VAV Controls
VAVs Controls are factory assembled & calibrated based on Customers project
requirements, which will comprise of :
DDC Controls (BACnet & LON Works)
Standalone System
Double wall construction
Standard Construction Details