
17
16
a perfect partner in performance...
a perfect partner in performance...
Pressure Independent Variable Air Volume ( Single Duct)
Receiving, Handling & Storage
The Variable Air Volume needs to be
handled carefully while loading or
offloading, as per the upright arrow marks
given on the unit in the right position. Care
should be taken in lifting the product in all
4 corners and placing them on a raised
floor level. Don’t pull or push the product
on the floor level.
Store the product always dry in
environment. Do not expose this product
into the dust or humid environment.
Never expose this product to temperature
exceeding 140ºF (60ºC). After receiving the
VAVs, check for both obvious and hidden
damages. If damage is found, record all
necessary information and file a claim
with the final carrier.
Indoor storage and protection from dirt,
dust and weather is highly recommended.
For safety and protection, follow all
instructions and adhere to applicable
building and electrical codes.
Safety Warning
Improper installation, adjustment,
alteration, service or maintenance can
cause property damage, Injury or death.
Read the installation, operating and
maintenance instructions thoroughly
before installing or servicing of this
equipment.
Maintenance
VAV’s does not typically require
maintenance as long as it is kept dry and
clean. If cleaning is required, use mild
detergents or solvents.
If the lubrication is desired for components
such as axle bearings, Shaft bearings etc.
do not use oil based lubricants or any other
lubricant that attract contamination or any
other lubricants that attack contaminants
such as dust.
Once the installation is finished, the
contractor should note / record complete
operation of the VAV’s. Also, on the VAV
performance the contractor / Building
owner should record the readings at every
month intervals, the complete operations
of the VAV from V-min. to V-max. positions,
date, time and maintenance engineer’s
name and signature.
VAV and their actuator must be maintained,
cycled and tested in accordance with:
•
The standards of ARI 880 (ETL intertek),
NFPA90A and SMACNA.
•
Actuator manufacturer recommendations.
•
VAV manufacturer recommendations.
Warranty
AIRWELLCARE warrants this equipment
to be free from defects in material and
workmanship for a period of one year from
the purchase date. Any units or parts which
prove to be defective during the warranty
period will be required or replaced at our
option. AIRWELLCARE shall not be liable
for damages resulting from misapplication
or misuse of its products. AIRWELLCARE
shall not be responsible for any installation
or removal costs. AIRWELLCARE shall not
be responsible for any services work done
by a third party or back charges from the
direct party.
Material Storage, Operation & Maintenance