AWB RG300 User Manual Download Page 37

Page: 37 / 215

ØßÐÌÛÎ

| System Settings

Firmware Upgrade

Confirm New Password

Enter the new password again for

verification. (Range: 3~12 characters)

Language

Selects English or Traditional Chinese as the web interface

language.

×ÎÓÉßÎÛ

ÐÙÎßÜÛ

The Firmware Upgrade page enables you to download new software to the

unit.

Figure 17: Firmware Upgrade

The following parameters are displayed on this page:

Upgrade

Downloads an operation code file from the web

management station to the RG300 using HTTP. Use the Browse button

to locate the code file locally on the management station and check the

Reset Configuration to restore factory defaults. Click Apply to proceed.

Auto Upgrade

Provides a method to automatically upgrade the

Gateway when new code is available, as indicated by the contents of an

information file provided by the WiMAX service operator. The Auto

Upgrade information file and code file can be located on the same

server or different servers.

Enable

Enables the automatic upgrade feature.

Update Interval

A time interval (in seconds) for checking the

Info URL for new software information.

Limit Rate

Places a limit on the firmware download rate from the

server.

Info URL

A text string that indicates the location of an Auto

Upgrade information file on an FTP server. The file contains

information on the version of software available, and the FTP server

on which it is located. (For example: ftp://192.168.1.16/

autoupgrade/RG300-autoupgrade.info)

Summary of Contents for RG300
























































































































































































































Search results

Summary of Contents for RG300

Reviews:

Related manuals for RG300

Brands by name

Popular brands

AWB RG300, User Manual

Search results

Summary of Contents for RG300

Reviews:

Related manuals for RG300

Brands by name

Popular brands