Premium Express Cordless 2
”
Faux Wood Installation Instructions
92-309951-18
Step 6: Attach Wand
Step 7: Blind Installation
Step 8: Valance Installation
Optional valance returns. Insert the valance return bracket into the return and the valance to attach the returns.
If your blind has the pre-installed magnetic valance clips
–
simply secure the valance to the steel headrail. If not, press the slot in the Valance against the
bottom post of the Valance Clip and rotate it upwards. Push the Valance against the Valance Clip. The two parts should snap together.
Step 9: Attach Hold Down Brackets
(Optional)
Attach wand by sliding the outer casing of the tilter stem up to expose the hook. Insert the wand and slide the outer casing down.
Cordless Operating Instructions:
To lower the blind,
pull down on the bottom rail with one hand gripping it near the middle or with both hands grabbing the bottom rail at equal distance
from the center. When released the blind will stay at the desired height.
To raise the blind,
hold the bottom rail with two hands keeping the blind level while
guiding the blind to the desired height. Once released, shade will stay in place.
To tilt the blind,
turn the tilter wand in either direction.
With the hold down brackets attached to the bottom rail, lower the blind to the hold down bracket mounting surface
and mark the bracket locations.
Attach the hold down brackets at the bottom of the window or door with the included screws as shown.
To attach the bottom rail, gently pull the brackets out slightly and insert the pins into the bracket.
Valance shown with return attached
Align the headrail with the center support and box brackets. The headrail should have the tilt
mechanism facing toward the room.
Be careful not to trap the top slat in the brackets. Slide the headrail straight back until it is
snug in the brackets.
Lower the bracket door making sure that it snaps securely closed.
