Award WO500, User Manual

Page: 30 / 33

Scrubbing with steel cleaning wires may harm the vitroceramic glass surface. Formations
of dust on the surface should be cleaned up using a dampened cloth.
Changes in colour which might occur on the ceramic glass surface do not affect the functional
structure or permanence of the vitroceramic. The reason for the changes in colour is not the change
in the material; it may be because the burnt residues on the surface are not cleaned up or the pots
used have worn the glass surface or because unsuitable cleaning materials were used.
The cleaning spatula should always be used prior to chemical cleaning substances. With this
spatula, you can clean up the tiniest of dirts on the vitroceramic surface. Dirts that are difficult to remove,
such as melted plastic, heavy oils, sweet substances, can be removed easily with the spatula. As the
spatula includes a razor, it is dangerous and must be kept out of reach of children.
During cleaning with the spatula, pay attention not to scrape off the sillicon adhesives found on
the sides of the glass.
1
2
Pull the wire shelf as shown in
the picture above.
After releasing it from
clips, lift it up.
Remove G screws on the each
catalitic enamel coated panel.
Telescopic rails
5.3 Removal of wire shelf