manualshive.com logo in svg

Award WO500, User Manual

Share
Download
Award WO500 User Manual Download Page 17

15

The oven’s thermostat and warning lights, the upper heating element, the
grill heater, the fan and the roast chicken function will be switched on.

The oven light, the red warning light and the fan will be turned on.
Performs the function of defrosting the frozen foods.

The oven’s thermostat and warning lights, the fan and the turbo heater will
be switched on.

The oven’s thermostat and warning lights, the fan, and the lower and
upper heating elements will be switched on.

The oven’s thermostat and warning lights, the grill heater and the roast
chicken function will be switched on.

The oven’s thermostat and warning lights, the upper heating element and
the roast chicken function will be switched on.

The oven’s thermostat and warning lights, the fan, the turbo heater and the
lower heating element will be switched on.

Table 1

The oven’s thermostat and warning lights and the lower and upper
heating elements will be switched on.

The Oven Light will be turned on.

The oven’s upper heating element will be switched on.

The oven’s lower heating element will be switched on.

Summary of Contents for WO500


































Reviews:

No comments

Brands by name

Popular brands

Load more brands