EN - 10
2.3 Electrical Connection and Safety
WARNING:
The electrical connection
of this hob should be carried out by
an authorised service person or
qualified electrician, according to the
instructions in this guide and in
compliance with the current local
regulations.
WARNING: THE HOB MUST BE
EARTHED.
•
Before connecting the hob to the power
supply, the voltage rating of the hob
(stamped on the hob identification plate)
must be checked for correspondence to
the available mains supply voltage, and
the mains electric wiring should be
capable of handling the appliance’s
power rating (also indicated on the
identification plate).
•
During installation, please ensure
that isolated cables are used. An
incorrect connection could damage your
hob. If the mains cable is damaged and
needs to be replaced this should be
done by a qualified person.
•
Do not use adaptors, multiple sockets
and/or extension leads.
•
The supply cord should be kept away
from hot parts of the hob and must not
be bent or compressed. Otherwise the
cord may be damaged, causing a short
circuit.
•
If the hob is not connected
to the mains with a plug, a all-pole
disconnector switch (with at least 3 mm
contact spacing) must be used in order
to meet the safety regulations.
•
The fused switch must be easily
accessible once the hob has been
installed.
•
Ensure all connections are adequately
tightened.
•
Fix the supply cable in the cable clamp
and then close the cover.
•
The terminal box connection is placed
on the terminal box.
•
Brown
Green
Blue
