Award E-295, Installation Manual

Page: 12 / 16

E-295 CEILING HOOD INSTALLATION GUIDE
The Ø150 mm hood air outlet must be connected to the air exhaust duct. A shape adaptor will be required to
attach the rectangular outlet to an circular section air exhaust duct .
REMARK! Try to seal the junctions between the adaptor and the duct, to avoid having any air loss. Finally, use
aluminium tape or plastic clamps to seal all the whole.
Plug the ceiling hood to the electrical network.
WARNING! Before plugging it, disconnect all sources of electric power until all the installation tasks are
completely finished.
Once the hood is powered on, verify that all the air conducts are sealed before closing the opening on the
suspended ceiling.
6.– SWITCHING ON
The ON/OFF button is placed under the filters. Open the front panel and remove the filter to switch it on/off.
REMARK!! Please follow the instructions detailed in page 12 to synchronize the remote control during the 15
seconds after the hood is powered and turned on, by pressing the LIGHT key in the remote control.
INTERNAL MOTOR VERSION
EXTERNAL MOTOR VERSION
Page 11