11
3.5 ELECTRIC CONNECTION AND SECURITY
During the electric connection, surely follow the instructions bellow:
The earthing cable must be connected to the earth terminal ( ).
If there is not any appropriate earthed electric outlet in accordance with regulations in the
place where the apparatus will be installed, immediately contact to our Authorized Service.
The electrical connection must be made as the figure below.
The earthed electric outlet must be close to the apparatus. Surely do not use the extension
cord.
The feeding cable must not touch to the hot surface of the product.
In case the feeding cable is damaged, surely contact to Qualified Service. The cable
must be changed by the Authorized Service.
The wrong electric connection may damage your apparatus. Such damage is not in
guarantee extent.
The apparatus is adjusted as appropriate for 220-240 Volts of electricity. If the network
electricity is different than this informed value, immediately contact to our authorized service.
The electric cable must not touch to the hot parts of apparatus. The electric cable must
not touch the back part of the apparatus. Otherwise the electric cable of apparatus may be
damaged. And this situation may cause short circuit.
The producer firm declares that it has no responsibilty against any kind of damages
and losses that emanate from the following security norms.
L
N
B
R
O
W
N
GREEN
B
L
U
E
3X1.5 mm , H05V V-F
Type power supply cord must be used.
Grounding lead must be connected
to screw with symbol.
²
