4.1.3 C
ontr
o
l
of the grill burner
CAUTION: Accessible parts may be hot when the grill is in use. Young
children should be kept away.
Right after you ignite the burner, place the grill heat shield under the control
panel. After that, lift the oven door up slowly until it stops at the semi-open (30
°) position and touches the heat shield.
Assembling the grill heat shield
Hold the heat shield as the warnings face upwards. There are two small slots on
the right and left side of the rear edge of the shield, as shown in the below
figure.
There are two screw equipped with bushes under the oven control panel. Align
the bushes with the assembly slots so that the shield is stuck between the
control panel and the bush. Push the shield towards the appliance until it is
firmly in its place.
C
o
o
ki
n
g
•
The grill burner cannot be modulated between max. and min. positions and
creates a source of heat at a constant rating. When turning the grill burner
off, turn the knob in the clockwise direction so that the knob shows
"
0
"
position.
th
th
•
Place the chrome grid on the topmost shelves
;
5 or 6
;
provided that the
food does not touch the grill burner
.
•
Preheat the grill on a full setting for a few minutes before sealing steaks or
toasting. The food should be turned over during cooking as required
.
•
Food should be thoroughly dried before grilling to minimize splashing. Brush
lean meats and fish lightly with a little oil or melted butter to keep them
moist during cooking
.
•
Foods should be placed on the center of the grid to allow maximum
circulation of air
.
•
Never cover the grill pan or grid with foil as this can lead to grill fires.
19
4. Part : USE OF YOUR OVEN
Figure 13
