![Award AFG101 Operating And Installation Instructions Download Page 13](http://html.mh-extra.com/html/award/afg101/afg101_operating-and-installation-instructions_3035231013.webp)
3. Part : INSTALLATION AND PREPARATIONS FOR USE
12
3.6 General warnings and measures
•
•
.
•
.
•
.
•
•
.
•
•
•
•
3.7 Gas conversions
:
Your appliance is produced in accordance with the local and international
standards and regulations applicable.
The maintenance and repair works must be made only by authorized service
technicians. The installation and repair works without following proper
knowledge may endanger you
While your appliance operates, its outside surfaces heat up. The interior
surfaces of oven, and the flue outlets are quite hot. Even if the appliance is
turned off, these parts keep its heat for a specific time. Do not touch onto
hot surfaces, and keep children away
Do not leave the cooker while cooking with solid or liquid oils. They may
catch fire on condition of extreme heating. Never pour water to the flames
that are caused by oil. Cover the saucepan or frypan with its cover in order
to choke the flame that has occured in this case and turn the cooker off
The oven and heat adjustment switches must be adjusted for cooking in your
oven. Otherwise the oven does not operate.
When the door or drawer of oven is open do not leave anything on it . You
may unbalance your appliance or break the cover
Do not put heavy things or flammable or ignitable goods (nylon, plastic
bag,paper,cloth...etc) into the lover drawer. This includes cookware with
plastic accessories (e.g. handles).
Plug the appliance off the electrical network when you do not use the
appliance and keep the gas valve off.
Protect your appliance against atmospheric effects. Do not leave it to effects
such as sun, rain, snow, powder etc.
Remember that this appliance is designed for indoor use.
Caution : The following procedures must be undertaken by authorized
service personnel.
Your appliance is adjusted to be operated with LPG gas. The gas burners can be
adapted to different types of gas, by replacing the corresponding injectors and
adjusting minimum flame length suitable to the gas in use. For this purpose,
following steps should be performed