29
461306964_004 01/2014
30
CHANGING THE FLEXIBLE GAS HOSE
In order to guarantee that the gas hose is always in
excellent condition we strongly recommend changing
it on the date you will find printed on it.
REPLACING THE ELECTRICAL COMPONENTS
• To change the oven lamp see the instructions given
in paragraph «REPLACING THE OVEN LAMP».
.
• The rear protection will have to be removed in order
to change the oven electrical heating elements,
terminal board and power cable.
• If you have to change the power cable (see the
cross section on table on page 19), always keep
the earth wire longer than the phase wires and,
in addition, follow all the instructions given in
the “ELECTRICAL CONNECTION” paragraph.
• To change the lamp holder (P) (fig. 30), remove the
side panels and then use a screwdriver to push the
two locking tabs and remove the lamp holder from
the inside of the oven.
• To change the hob electrical heating elements,
remove the hob, unscrewing frontal and rear fixing
screws (Vs) (fig. 27) which lock the hob at the
supports (S).
• To change the thermostat, the commutator, the
indicator lights and the electronic programmer,
remove the front panel as indicated in the paragraph
«REPLACING THE TAPS»
.
INSTRUCTIONS FOR THE INSTALLER
