Orion USB3 Evaluation Kit
2 System Overview
The evaluation kit is composed of two boards, one off-the-shelf USB-FPGA interface and another
one specific to the Orion sensor.
Legend
A
Orion sensor: 1K or 2K
B
FX3 USB 3 controller reset button
C
FPGA soft reset button
D
JTAG connection pin: 1, 2, 4, 6, 8, 10
E
USB3 plug
F
GPIO: 1 - External trigger Input
2 - VCC
3 - LVAL Segment 2
6 - LVAL Segment 1
9 - MISO
11 - MOSI
13 - SCLK
15 - N_CS
G
Connector to the adapter board (Hirose DF17(4.0)-80DS-0.5V(57))
Table 1: Orion interface board
Date: 30/03/16
Version 1.0.4
Page: 5/16
Figure 2: ORION interface board
