AWA W700 Instruction Manual Download Page 13

23

22

Resetting the counter to zero

Press 

MENU

and choose ‘Tape Control’ by pressing 

PR+

and then

OK

.

Choose ‘Counter Reset’ by pressing

PR-

twice and then 

OK

.

The video will reset the counter to zero.

COUNTER  RESET

0:00:00

This display will only appear when there is a cassette in the video.

Cassettes

Use only good-quality cassettes with the VHS logo.

• Keep cassettes away from moisture or dust, magnetic and

electrical fields (for example, loudspeakers and computer
monitors).

• Always rewind cassettes to the beginning when you have finished

using them. Stand cassettes up with the full spool at the bottom.
Always keep cassettes in their cases.

You can protect your precious recordings from being recorded over by
breaking off the safety tab on the side of the cassette (some
cassettes have a slide). When you have removed the tab your video
will eject the cassette if ever you try to record onto it.
If you want to record onto the cassette after removing the tab, cover
the hole with sticky tape.
We advise you to use a head - cleaning cassette every six months to
keep your video in perfect working order.

PAL

Clock and counter display

The counter counts in real time from when you load the cassette. This does not have to be at the beginning

of the cassette. The counter does not count unrecorded parts of the cassette.

If you rewind the cassette, the counter will count backwards, if you rewind beyond the zero position, the

counter counts in negative values for example,  – 0:01:15.

This display will only appear when there is a cassette in the video.

STOP   SP            PR01   P-01

14:00  07/04  

STEREO  ON

Press 

once to display the time and date.

Press 

twice to display the counter time and how long is

left to the end of the cassette.

Press 

three times to clear the screen.

A

A

A

Remaining time and cassette length

Choose ‘Tape Remain’ by pressing 

OK

Press 

PR+

or 

PR-

to select the length of your current cassette.

Press 

OK

to confirm. The display will show how long is left to the

end of the cassette.
This will be displayed for several seconds only.

Finding the counter zero position

Press 

MENU

and choose ‘Tape Control’ by

pressing 

PR+

and then 

OK

.

Choose ‘Go to Zero’ by pressing

PR-

and

then 

OK

.

The video will wind to the position 0:00:00
and stop.

REW    SP                   
GO TO ZERO

0:02:13

TAPE CONTROL

TAPE REMAIN

E-240  01:27

TAPE REMAIN
GO TO ZERO
COUNTER  RESET

E-180
E-240
E-300

PR+/-:SELECT
OK:CONFIRM    MENU:END

PR+/-:SELECT
OK:CONFIRM    MENU:END

This display will only appear when there is a cassette in the video.

Press 

MENU

and choose ‘Tape Control’ by pressing 

PR+

and then 

OK

This display will only appear when there is a cassette in the video.

These buttons are used
on the following three
pages.

Summary of Contents for W700


















Reviews: