To remove the Vacuum Hose from the Cyclonic Vacuum Cleaner, push the release button on the top of the Plug
end of the Vacuum Hose and pull gently away from the Socket.
Attaching the Floor Brush to the Telescopic Tubes
Extend the Telescopic Chrome Tubes by pressing the black button in the direction of the arrow, and pulling on
the end of the Tubes also in the same direction of the arrow on the black button. When you have reached the
optimal length for the Tubes, release the black button and a click noise will be heard. This means that the Tubes
are now locked in this position.
To shorten the Tubes for storage, press the black button in the direction of the arrow, and push the two ends of
the tubes together.
To attach the floor Brush to the extended Tubes, insert the larger end of the Chrome Tubes over the connection
end of the Floor Brush and push together firmly.
To separate the Floor Brush from the Tubes, pull in opposite directions with a slight twisting action, being
careful not to damage the connection end of the Floor Brush.
4
Supply Cord Connection and Rewind
Carefully pull the supply cord from the vacuum cleaner. Note. There is a “Yellow” indicator on the cord that
indicates the optimum length.
Warning!
Do not pull the supply cord fully out past the “Red” indicator
mark. This may cause damage long term to the rewind mechanism.
Insert the supply plug into a suitable 230-240V ~ 50Hz power outlet socket. The Cyclonic Vacuum Cleaner is
now ready for use.
To rewind the supply cord simply press the rewind button while guiding the supply cord into the appliance.
Rewind Button
Red
Yellow
Switching Power ON
Press the ON / OFF button to commence vacuuming.
ON/OFF Switch
5
