Basic Operation
23
Press the Standby button on the remote control. The TV will be turned on and you will be ready to use its feature.
You can also use the Standby button on the front panel.
Please wait at least 14 seconds before the picture is displayed upon press of standby button.
Press MENU key to display menu, and press VOL+ or VOL- key to select sub menu.
PICTURE MENU -> AUDIO MENU -> INSTALL MENU -> GEOMETRY MENU -> SYSTEM MENU
Menu key has two functions: First is opening or closing the menu, and second is closing the current menu and
then opening the previous menu. Press the MENU key on the remote control unit to cancel the menu function.
After entering an item, you can select the desired adjusting item by pressing CH+/CH- keys, and adjust it by
VOL+/VOL- keys.
Press SOURCE button to enter source select menu and press UP/DOWN button to select input signal, then
press LEFT/RIGHT button to switch signal source
Turning the TV On/Off
Source Select
Select Source
TV
DTV
AV
S-VIDEO
YPbPr1
YPbPr2
PC
HDMI1
HDMI2
Source
