PTZ Control
1 .Power On
This device has two types of power use.
1) Connect provided adaptor to power.
2) Insert 9V batteries inside. (Do not connect adaptor.)
3) Power on external devices which are connected to this device before power on of this device.
4) Turn on the power by pressing button.
5) will be displayed on the screen.
2. Start Page Displayed
1) ID: This shows the ID of the currently selected camera.
2) Shows the currently selected protocol.
3. Camera ID Set Up
1) Input the wanted number button in the number pad.
2) Press button then Camera ID will be set up as your selected number.
* 1-255 numbers are selectable. When the number outside the range of inputs selected, the last
selected number will be treated as the first digit.
[WDS PEL-D 2.4K]
ID : 001
[WDS PEL-D 2.4K]
ID : 001
ENT
[WDS PEL-D 2.4K]
ID : 001
111