background image

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS.

 Failure to follow all instructions 

listed below may result in electric shock, fire, or serious personal injury.

!

WARNING: 

When using electric appliances, basic precautions should always be followed, 

including the following:

!

WARNING: 

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Keep bystanders, children, and visitors away while operating an inflator

. Distractions can 

cause you to lose control.

Operate inflator in an open area at least 18

 away from any wall or object that could restrict

the flow of fresh air to ventilation openings.

ELECTRICAL SAFETY

To reduce the risk of electrical shock, do not put inflator in water or other liquid. 

Do not

place or store appliance where it can fall or

2.

 This appliance is not intended for use by persons (including children) with reduced 

    physical, sensory and mental capabilities, and lack of experience and knowledge, unless 
    they have been given supervision and instruction concerning use of the appliance by a 
    person responsible for their safety.

 Children should be supervised to ensure that they do 

    not play with the appliance.

 be pulled into a 

Use this product only with approved batteries and chargers.

PERSONAL SAFETY

Stay alert, watch what you are doing  and use common sense when operating an inflator.

Do not use inflator while tired or under the influence of drugs, alcohol, or medication. A moment

of inattention while operating inflator may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewellery. Contain long hair.

  Keep your hair,

clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught

in moving parts.

Do not overreach. Keep proper footing and balance at all times.

 Proper footing and balance

enable  better control of the inflator in unexpected situations.

Use safety equipment. Always wear eye protection.

 Dust mask, non-skid safety shoes, hard

hat, or hearing protection must be used for appropriate conditions.

Eye protection is required to guard against fasteners that may have come loose and debris 
which could cause severe eye injury.
Do not disassemble the inflator.
Do not operate inflator near flammable liquids or in gaseous or explosive atmospheres.

Internal sparks may ignite fumes.

Do not store your inflator in a damp or wet location.

 Do not store in locations where the

temperature is less than 10°C or more than 37.7°C. Do not store in outside sheds or in vehicles.

INFLATOR USE AND CARE

Check hoses for weak or worn condition before each use, making certain all connections
are secure. 

Do not use if 

 is found. Purchase a new hose or notify an

authorised service center for examination or repair.

Release all pressures within the system slowly.

 Dust and debris may be harmful.

Do not use inflator if switch does not turn it on or off.

 An inflator that cannot be controlled

with the switch is dangerous and must be repaired.

 making any adjustments, changing accessories, or storing the 

inflator.

 Such preventive safety measures reduce the risk of 

starting

2

Summary of Contents for C192069











Reviews: