DVR User Manual
10
3
Basic Function Instruction
3.1 Power On/Off
Before you power on the unit, please make sure all the connection is good.
3.1.1 Power On
Step 1
: Connect with the source power.
Step 2
: The device will boot and the power LED would turn blue.
Step 3
: A WIZZARD window will pop up and show some information about time zone, time
setup, network configuration, record configuration and disk management. User can setup here
and refer to the concrete setup steps from the corresponding chapters. If users don‟t want to
setup Wizard, please click Exit button to exit.
Note:
This DVR can only display options on either VGA/HDMI monitor or BNC
monitor at a given point of time, if there is live image display without menu options
then please check if there is display on other device/monitor, or long press Exit key to
wait for login dialog box to appear. Long press Exit key can switch the output
between BNC and VGA/HDMI.
3.1.2 Power Off
User can power off the device by using remote controller, keyboard and mouse.
By remote controller:
Step 1
: Press Power button. This will take you to a Shut down window. The unit will power
off after a while by clicking OK button.
Step 2
: Disconnect the power
By keyboard and mouse:
Step 1
: Enter into
Menu and then select “Shut Down” icon to pop up the Shut down
window.
Step 2
: Click OK. Then the unit will power off after a while.
Step 3
: Disconnect the power.
3.2 Login
User can login or log off the DVR system. Once logged off the user cannot do any other
operation except changing the multi-screen display.
