Avtex L270DRS, User Manual

Page: 26 / 42

26
I. Turn on the TV
2. If the CAM is detected the TV will display the following
message on the screen:
Common Interface Module Inserted
Wait for a few moments until the card is activated.
Common Interface Slot
The Common Interface (Cl) slot is designed to accept the
Conditional Access Module (CAM) and Smart card in order to
view the pay TV programmes and additional services. Contact
your Pay per View TV provider to get more information about
the modules and subscription.
Note:
Conditional Access Modules and Smart cards are
sold separately.
Warning! Switch off your TV before any
modules are inserted in the Cl slot.
The Cl slot is located on the rear of your TV.Insert the CAM
correctly into the Cl slot, then add the Smart card to the
CAM.
3.Select the relevant digital channel
4.Detailed information on the Smart card in use is displayed.
5.Press the button to access the card menu.Refer to the OK
module instruction manual for setting details.
6.When the module is removed, the following message will
appear on the screen:
Common Interface Module Removed
HDMI/AV MENU
The menu setup of HDMI modes is similar to the TV
mode MENU, except that Channel MENU is not available.
If there is no signal input when the TV is in HDMI mode ,
the following screen will be displayed:
If a signal input is not detected within 5 minutes, the TV will go
into Standby mode.
Operating the TV
NO SIGNAL