Avtek TouchScreen 65, User Manual

Page: 14 / 94

12
Be sure to pull the power plug out of the outlet if the product is to remain unused or if you
are to leave the house for an extended period of time.
Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the
power cord to generate sparks and heat or the insulation to deteriorate.
Do not allow children to hang onto the product.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not install the product in an unstable location such as a shaky self, a slanted floor or a
location exposed to vibration.
Do not drop or impart any shock to the product. If the product is damaged, disconnect the
power cord and contact a service center.
Make sure to pull out the power cord from the outlet before cleaning the product.
CAUTION
Do not leave a static image displayed for a prolonged period of time. If a static image is
displayed continuously for a long period of time, that image may stick on the display (a
phenomenon known as “image stick”). This condition is not permanent but may require a
considerable amount of operational display time to dissipate, depending upon the degree of
image stick. 120 minutes of continuous motion display will eliminate most image sticking
effect at normal room temperature or not lower than 10°C.
As the nature of the TFT technology, you may see some amount of bright, dark, red, green
and blue dots and sparklings on the screen, those do not affect the performance of the
notebook and are not accepted as a defect.
The latest version of the manual can be found on the http://www.avtek.eu website.