Avtek Meeting Cam, Quick Manual, Page: 9 / 44

9
FOCUS KEY ( ON THE LEFT)
Manual focus, only valid under manual focus model.
ZOOM KEY ( ON THE RIGHT SIDE)
Set the zoom rate
NAVIGATE KEY: UP/DOWN/LEFT/RIGHT
Under working mode, use navigate key to set the pan tilt, and select menu when enter OSD.
OK /HOME KEY
Under working mode, short press OK to make the camera go back to HOME position; and
confirm the selection when enter OSD.
AF: Auto Focus
MF: Manual Focus
RESET: Reset camera
MENU: Enter OSD menu
LIMIT L: Set the pan tilt left limit position.
LIMIT R: Set the pan tilt right limit position.
LMT CLR: Clear the limit position.
BLC OFF/ BLC ON
：
Close/open back light compensation(not supported)
BRIGHT-/: Set image brightness, only valid under bright priority exposure mode.
Video resolution Keys:
Long press 3 seconds to select different video resolution output.
(1080P60/50 not supported)
OSD MENU
1. Under working mode, press the MENU key on the IR remote controller,
to enter the OSD menu as on the picture

2.
After enter the main menu, use the navigate key to select
the main menu. Once been selected, the main menu will change to blue
background, and the right side will show all sub menu options .
3. Press the navigate key to enter sub menu; use key to
select the sub menu; use key to select parameter.
4.
Press the MENU key again to return to previous menu. Press the
MENU key continuously to exit the OSD menu. Before exiting, will show up
a window to select whether need to save all settings(use key to
set). Picture
