background image

Extreme Temperature Sensor 

(RMA-ET1-SEN)

 

AVTECH Software, Inc.

 

Page 5 of 5

 AVTECH.com

 

Extreme Temperature Sensor Features & Specifications 

Environment Condition Monitored

 .................. Extreme-cold ambient temperatures 

Type Of Sensor

 ................................................... Analog 

Power Supply

 ...................................................... 18V power adapter 

     Included .......................................................... Yes 

Thermocouple

 

     Included .......................................................... Yes 
     Length ............................................................. 10' 

     

Operating Range ............................................. -328º F to 32º F (-200º C to 0º C) 

     Steps Between Temperature Readings ............ Approximately 2.37º F (1.32º C) 

Sensor Cable Type

 ............................................. Low-voltage, 2-wire speaker cable

 

     Included .......................................................... Yes 
     Length ............................................................. 25' 

 

     Maximum Extendible Length ......................... 900' 

Sensor ID Box Operating Range

....................... -40º F to 185º F (-40º to 85º C) 

Compatible Products

 ......................................... Room Alert 32E/W & 12E (built-in Analog Input Port);   

 ............................................................................. 

Digital Temperature & Analog Sensor 

AVT–140527.07 

Summary of Contents for RMA-ET1-SEN






Reviews: