FEATURES
1.
1/2.7” CMOS Sensor
2.
1080P video output
3.
Low light sensitivity of 0.1 Lux / F1.8, 0Lux (IR LED ON)
4.
Day and night 24-hour surveillance with IR effective distance up to 15 meters
5.
IP66 for weather-proof application
PACKAGE CONTENT
IR camera
User manual
Sun shield
Installation Sticker
Accessory
SPECIFICATIONS*
Pick-up Element
1/ 2.7” CMOS image sensor
Number of Pixels
1930(H) x 1088(V)
Video Frame Rate
1080P@30fps / 1080P@25fps
Min. Illumination
0.1 Lux / F1.8, 0 Lux (IR LED ON)
S/N Ratio
More than 48dB (AGC OFF)
Shutter Speed
1/30 (1/25) sec ~ 1/720000 (1/600000) sec
Lens
f3.6mm / F1.8
Lens Angle
96° (Horizontal) / 50° (Vertical) / 116° (Diagonal)
IR LED
12 units
IR Effective Distance
Up to 15 meters
IR Shift
YES
Day & Night Mode
YES
IRIS Mode
AES
White Balance
AUTO / USER / PUSH / 8000K / 6000K / 4200K / 3200K
AGC
Adjustable
Sharpness
Adjustable
Flickerless
50HZ / 60HZ / OFF
BLC
Adjustable
IP Rating
IP66
Operating Temperature
-20
℃
~ 40
℃
Video Output
1.0 Vp-p composite, 75
Ω
Power Source (±10%)
DC12V / 0.5A
Current Consumption (±10%)
200mA
* The specifications are subject to change without notice.
CONNECTION
1. DC12V
Input
Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE:
Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power
tolerance of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this
unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output to the video input of a DVR with 75
Ω
coaxial cable.
NOTE:
To ensure the camera has sufficient protection against moisture, an extra waterproof
measure, such as by using an insulating tape, must be used to cover the power and video
connectors after connection.
