328Z
X951_V0.9
Step2: Communicate AVX951A(s) with your camera
If you have only one AVX951A,
Or, if you have two AVX951As, there are two ways of connection as shown below
Step3: Connect a diversity of external alarm devices to AVX951A
4 inputs and 4 outputs are provided for
external devices connection. You can configure alarm
devices according to your own situations.
Note: AVX951A allows the external alarm device to be connected to use both DC and AC power supplies, but a
power supply should be the same as the neighboring sockets. Please see the examples in the picture below:
Note: When external devices are connected properly, please insulate the screws on the output terminal for security.
Step 4: Power on AVX951A
There are three ways, as listed below to connect a power supply, and choose one that is
convenient for you. As you plug AVX951A in, the status LED indicators shows red.
a) Via DC Jack
b) Via dry contact
c) Via RJ-11 cable
Step 5: Power on your camera
When AVX951A and the camera are connected, the status LED indicators shows green.
Step 6: Access your camera on Internet Explorer
Click Home Automatic to enter the setting page and change trigger methods and Push message.
