PANEL OVERVIEW
INSTALLATION
Before you install AVX951A, please make sure:
You have an AVTECH camera with RS485 protocols
Find a RJ-11 cable and two terminals supplied with the package
Insert two terminals into AVX951A and fix them with screws
Then, follow the instructions below to set up AVX951A:
Step1: Assign ID to AVX951A
As shown below, use ID switch and choose a value from 1 to 8 to assign ID to the AVX951A to be
connected. (1 means the least significant bit and 8 means the most significant bit)
AVX951A is able to support two devices to be chained together to expand the I/O capacity. To
distinguish one device from another, please assign different IDs to the two devices.
For example, to assign “1” to AVX951A, push the switch1 upward, and keep the rest of switches
downward. On the other hand, to assign “2” to another AVX951A, please push the switch2
upward, and leave the rest down.
