Item
Description
FOCUS MODE
Select the default focus mode when you’re adjusting the focal length and focus as described in the
previous section of “FOCAL LENGTH & FOCUS ADJUSTMENT”. Choose
AUTO
to always
automatically adjust the focus first when the focal length is changed; choose
MANUAL
to allow
manually focus adjustment first when the focal length is changed.
DEFOG Select
ON
to enable the defog function in poor weather conditions such as fog, smog or smoke. The
captured image can be improved.
ANGLE OF VIEW
This function is used to slightly calibrate the viewing angle when the focal length and focus
adjustment is completed. Select
DOWN
if your camera lens is facing down; select
UP
if your
camera lens is facing up.
IR CONTROL
Select
AUTO
to automatically enable IR LEDs at night or in the dark environment, or
OFF
to disable
this function.
ENHANCE IR
This function is used to enhance IR LEDs performance for longer projection distance.
Note: It’s not recommended to enable this function for a long time as it might impair the lifetime of IR LEDs
IR TURN ON LEVEL
Select the level for IR light to activate.
0
~
20
. The higher the value, the more sensitive the IR light to
activate.
IR DELAY TIME
Set the delay time from
1
~
60
in second after which the day and night switch is made, or select
0
to
disable this function.
This is used for the environment where the light condition may change suddenly and usually last for a
short time, for example, the entrance of a parking lot. It may cause the day & night mode switching
constantly and damage the camera.
With this function, the camera will delay the mode switch at night since the light change is temporary
and unnecessary to pay attention.
RESET DEFAULT
Click to reset all camera settings to their default values. The camera will reboot to complete the reset
process.
REBOOT THE SYSTEM
Click to reboot the camera if necessary.