control using VXI-11.3, ssh,
telnet, & web:
http://www.avtechpulse.com/options/vxi
for details.
Settings resolution:
The resolution of the timing parameters varies, but is always
better than 0.15% of the set value. The amplitude resolution is
typically 0.02% of the maximum amplitude.
Settings accuracy:
Typically ± 3% (plus ±1V or ± 2 ns) after 10 minute warmup.
For high-accuracy applications requiring traceable calibration,
verify the output parameters with a calibrated oscilloscope
2
.
Power requirements:
100 - 240 Volts, 50 - 60 Hz
Dimensions:
100 mm x 430 mm x 375 mm (3.9” x 17” x 14.8”)
Chassis material:
Cast aluminum frame and handles, blue vinyl on aluminum cover plates
Mounting:
Any. Add -R5 to the model number to add a rack-mount kit.
Temperature range:
+5°C to +40°C
1) -B suffix indicates IEEE-488.2 GPIB and RS-232 control of amplitude and frequency. See
http://www.avtechpulse.com/gpib
for
details.
2) These instruments are provided with a basic calibration checksheet, showing a selection of measured output parameters. These
measurements are performed with equipment that is calibrated on a regular basis by a third-party ISO/IEC 17025:2005 accredited
calibration laboratory. However, Avtech itself does not claim any accreditation. For applications requiring traceable performance,
use a calibrated measurement system rather than relying on the accuracy of the pulse generator settings.
8
Summary of Contents for AVR-D3-B
