Avtech AVMP-4-B, Instructions Manual

Page: 5 / 42

INTRODUCTION
The AVMP-4-B is a high performance, GPIB and RS232-equipped instrument capable
of generating up to 10V into 50Ω loads at repetition rates up to 1 MHz. The output pulse
width is variable from 10 ns to 10 us, and the sync delay is variable up to ± 1 s. The rise
and fall times are less than 200 ps.
A 50 Ohm load is required for proper operation.
Instruments with the "-P" model suffix can generate up to +10V, whereas instruments
with the "-N" model suffix can generate up to -10V. Instruments with the "-PN" suffix can
generate both polarities.
The AVMP-4-B is a highly flexible instrument. Aside from the internal trigger source, it
can also be triggered or gated by external TTL-level signals. A front-panel pushbutton
or a computer command can also be used to trigger the instrument.
The AVMP-4-B features front panel keyboard and adjust knob control of the output
pulse parameters along with a four line by 40-character backlit LCD display of the
output amplitude, pulse width, pulse repetition frequency, and delay. The instrument
includes memory to store up to four complete instrument setups. The operator may use
the front panel or the computer interface to store a complete “snapshot” of all key
instrument settings, and recall this setup at a later time.
This instrument is intended for use in research and development laboratories.
AVAILABLE OPTIONS
The AVMP-4-B is available with several options:
-M Option: a monitor output is provided.
-R5 Option: A rack mounting kit is available. The -R5 rack mount kit may be installed
after first removing the one Phillips screw on the side panel adjacent to the front handle.
5