Avtech AVM 301, Operation Manual

Page: 8 / 56

3
2. CAMERA ACCESS WITH INTERNET EXPLORER
This network camera can be accessed via Microsoft® Internet Explorer® and iPhone / iPad / Android mobile devices
with our self-developed program “EagleEyes” installed depending on different using situations.
Note: For details about accessing network cameras via iPhone / iPad / Android mobile devices, please
refer to
http://www.eagleeyescctv.com .
Before using the camera, make sure you have configured the network settings, and the network connection is fine.
For network configurations, please refer to:

“
Quick Setup With iPhone / iPad
” supplied with your camera if you’re using iPhone / iPad, and your network
environment is wireless.
 “
ADVANCED NETWORK SETUP
” downloadable from www.surveillance-download.com/user/m301.swf if your network
environment is not wireless.
2.1 Camera Login
Step1: Open your web browser, and key in http:// ipaddress : portnum in the URL address box.
For example, for the IP address 60.121.46.236 and port No. 888, please key in ”http://60.121.46.236:888” into
the URL address box, and press “Enter”.
Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.
Then, click “LOGIN”.
Step3: The wizard is then started.
‧
To skip the wizard and directly access the camera live view, click “Close”.
‧
To directly access the camera live view without starting the wizard for the login next time, check “Do not start wizard at login”.
Note: If you’re prompted to install “VLC player”, “Software” or “H264 Streaming Viewer”, please agree
to proceed the installation. Or, you might not be able to see the live view properly.
Step5: When the login is successful, the live view is shown.
2.2 Control Panel Overview
Note: The buttons available depend on the user level used to log in.