Avtech AVM 301, Operation Manual

Page: 6 / 56

1
1. OVERVIEW
1.1 Product Features
 Easy
network setup
with your
iPhone / iPad

1.3 Megapixel
H.R. sensor with
HDTV 720p
quality, allowing users to notice minor details more easily

External alarm I/O device
connection
 Microphone built-in for
audio recording

Remote Surveillance
-- Fully compatibility
on
iPhone & iPad
, and
Internet Explorer®
on Windows® operating system
1.2 Package Content
□
Network camera
□
Camera Bracket
□
4-pin Terminal
□
Quick Setup with iPhone / iPad
□
Adapter
1.3 Product Overview
1.4 Rear Panel
RJ45 Port: Connect your network cable.
Power: Connect the supplied regulated power supply.
Reset: With the power connected, press to reset all parameters, including the IP address to factory default
settings.
The camera will reboot after default reset. Please do not disconnect your camera during the reset
process.
External I/O Port A 4-pin I/O terminal is supplied with the camera for external alarm device connection. For details,
please refer to “1.5 External I/O Port” at page 1.