CONNECTION
4
2.2 Manual Connection Setup
To manually assign a channel to connect to the IP camera, select a corresponding “PROTOCOL” from the drop
down list first, click “URI” to enter the address of the camera, and enter its port number. There are four protocol
types available in the drop down list as follows: “AVTECH”, “ONVIF”, “RTSP OVER HTTP”, and “RTSP OVER
UDP”. If you are using AVTECH IP cameras, please select “AVTECH”; otherwise, choose the protocols your
cameras support.
ADVANCED CONFIG
CONNECTION
CHANNEL
URI
PORT
PATH
CONFIG
CAMERA
CH1 AVTECH ://ip_office.ddns.eagleeyes.tw :80 /
SETUP
DETECTION
CH2 ONVIF ://10.1.1.14 :88
/
SETUP
ALERT
CH3
RTSP OVER HTTP ://10.1.1.30 :88
/
SETUP
NETWORK
CH4 RTSP
OVER
UDP ://10.1.1.12 :88
/
SETUP
DISPLAY
CH5 AVTECH ://10.1.1.16 :88
/
SETUP
RECORD
CH6 AVTECH ://10.1.1.13 :88
/
SETUP
EXIT
