INSTALLATION AND CONNECTION
INSTALLATION AND CONNECTION
2.1 PHYSICAL CONNECTION
2.1 PHYSICAL CONNECTION
5
6
6
Close and lock the HDD tray
NOTE:
Please set the HDD as “Master” or “Single” mode (Do not use “Slave” mode).
It’s NOT recommended to use “Cable Select” mode for the HDD detection might get wrong.
1)
Install HDDs:
Follow the steps below to install HDDs.
1
1
Unlock the HDD tray
2
2
Pull out the HDD tray
Unlock
Unlock
Lock
Lock
Screw the HDD into the HDD bracket
3
3
4
4
Connect the HDD to the
power bus and data bus
and secure the connection
5
5
Secure the HDD
bracket to the IDA
Thermal
Thermal
conductive
conductive
silicone
silicone
rubber
rubber
Be sure to let the HDD contact with
the silicone rubber.
The normal height of HDD is 10.85
or 19.55 mm. Base on the height of
HDD, please screw the HDD onto
different height screw holes.
HDD bracket
HDD bracket