AVT MAGIC DAB, Hardware/Software Description

Page: 30 / 70

PAGE 30
W i n d o w s P C S o f t w a r e E T I D e c o d e r
7.5.1 Submenu Com Port
If the message PC not connected
1
appears, please check the selected COM
port under the submenu Configuration -> COM Port and change the set-
tings. Factory settings are: 19200 Baud and Parity None .
FIG. 13 COM PORT KONFIGURATION
7.5.2 Submenu System Configuration
7.5.2.1 Configuration of the Line interface
FIG. 14 CONFIGURATION OF THE LINE INTERFACE
The page Line Interface allows the configuration of the 2-Mbit/s interface.
As reference clock you should normally select Recovered Clock . This setting
generates the clock from the incoming 2-Mbit signal.
Alternatively you can use the setting
External Clock , if you have connected
an external clock to the clock input. The setting Internal Clock is only for test
purposes. In this case the clock is generated by the system.
1 If the connection is faulty try 9600 Baud and Parity Odd.