AVT MAGIC DAB, Hardware/Software Description

Page: 20 / 70

PAGE 20
5.2 Configuration of the headroom of the analogue output
The jumpers for the configuration of the headroom are located as shown in
FIG. 7. Before changing the settings please make sure, that the power supply
cable is disconnected. The figure below shows the setting of the jumpers. The
following settings can be selected:
– 6 dB Headroom and
– 10 dB Headroom.
The factory setting is 6 dB headroom since the MAGIC Encoder systems are
also configured with 6 dB headroom.
FIG. 7 CONFIGURATION OF THE HEADROOM OF THE ANALOGUE OUTPUT
Important The jumpers for the left and right channels must be configured in the same
way.
!
10 dB
6 dB