34
3.10.3.9
Zoom
–
turns all targets in the current row ON or OFF. (Figure 1-2)
3.10.3.10
PIP
–
turns all targets on the screen ON or OFF. (Figure 1-3)
3.10.4 Press
“
SLOW
“
button to setup the Sensitivity list
up to 255
Press
“
REC
“
button to setup the Sensitivity list
down to 000
Sensitivity value is related to motion and brightness change.
Low value (as 001) means higher sensitivity on motion and brightness change.
High value (as 255) means lower sensitivity on motion and brightness change.
User can choose the suitable sensitivity value in different locations.
The default value is set on 032.
Note:
If Motion Detection is set, and to be activated, there will be 2 actions as followings:
1). Live video - the motion detected camera(s) will be scanned more frequently, if the Video set
up for 16 cameras, the sequence to scan the cameras are from 1st, 2nd, 3rd... until 16th
cameras, but if the motion is detected on Camera #1, the sequence to scan #1 camera will be
more frequently. It will be scanning as 1st, 2nd, 1st, 3rd, 1st, 4th...1st, 9th.
The motion-detected camera will be scanned more frequently, which will be one after another
camera been detected. If 2nd camera and 3rd camera both motion detection are activated, they
will be scanning as 1st, 2nd, 3rd, 2nd, 2nd, 3rd, 3rd, 2nd, 3rd, 4th, 2nd, 3rd....3rd, 9th, 2nd, 3rd
and vice versa.
2). Recorded Video - more frequently video will be recorded for the motion detected cameras,
function same as Live video in the above mentioned.
Basically, the motion detection will show while in live mode on monitor. When motion trigger
record setting is ON, it can automatically switch from stand-by mode to activate Record Mode.
Figure 1
MOTION DETECTION SETUP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
032
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
