23
Press
“
► ”
to clear HDD
NO: Confirm not to clear HDD.
3.5.12.4 Press
”
MENU
”
to exit and confirm current operation.
3.5.12.5 Press
”
MENU
”
again to exit and close
SYSTEM
setup mode.
3.5.13 SYSTEM RESET setup
This device allows user to reset the system.
3.5.13.1 Press
”
Up
”
or
“
Down
”
to choose SYSTEM RESET setup.
3.5.13.2 Press
”
ENTER
”
to confirm SYSTEM RESET setup.
3.5.13.3 Press
”
”
Up
”
or
“
Down
”
to choose SYSTEM RESET Yes or No
YES: To confirm System Reset (load default system reset)
NO: Confirm not to System Reset
3.5.13.4 Press
”
MENU
”
to exit and confirm current operation.
3.5.13.5 Press
”
MENU
”
again to exit and close
SYSTEM
setup mode.
3.5.14 REMOTE MODE setup
This device allows user to set the remote mode.
3.5.14.1 Press
”
Up
”
or
“
Down
”
to choose REMOTE MODE setup
3.5.14.2 Press
”
ENTER
”
to confirm REMOTE MODE setup
3.5.14.3 Press
”
Up
”
or
“
Down
”
to choose Interface for REMOTE MODE setup
RS-232: Use RS-232 interface
RS-485: Use RS-485 interface
3.5.14.4 Press
”
MENU
”
to exit and confirm current operation.
3.5.14.5 Press
”
MENU
”
again to exit and close
SYSTEM
setup mode.
3.5.15 Remote protocol Transmitting Baud Rate setup
This device allows user to set the remote protocol transmitting baud rate.
3.5.15.1 Press
”
Up
”
or
“
Down
”
to choose Baud Rate setup.
3.5.15.2 Press
”
ENTER
”
to confirm
3.5.15.3 Press
”
Up
”
or
“
Down
”
to choose BAUD RATE setup
115200
、
57600
、
19200
、
9600
、
4800
、
3600
、
2400
、
1200
3.5.15.4 Press
”
MENU
”
to exit and confirm current operation.
3.5.15.5 Press
”
MENU
”
again to exit and close
SYSTEM
setup mode.
3.5.16 Remote protocol ID setup:
This device allows user to control different DMR by setting RS232 remote protocol.
ID number can be set from 000 to be 999.
