ADULT OPERATING REQUIRED!
WARNING:
1. Connect button (build connection)
Lift the battery compartment door on the back of the controller and insert two AAA (LR03)
batteries.
NOTE: Batteries not included.
Refer to the battery information on page 2.
Press and hold the connect button for 3 seconds, the indicators flashes, mean that the remote
controller is in the connected state. Then power on the product:
•
The indicators goes to long bright, means the connection successful.
•
If indicator no response, means the connection failed. Turn off the remote conntroller (by
removing the batteries) and the product. And try again.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
•
Leave the remote controller idling for about 10 seconds, it will shut down automatically.
• After you replacing the batteries of the remote controller, please rebuild the connection. (step 1)
Connect button
Forward button
Left turning
button
Right turning
button
Brake button
Indicators
NOTE:
The remote control has precedence over foot pedal operation.
(The foot pedal won’t work while you operate the Remote Controller)
Reverse button
Use the Remote Controller
7
